15pc Auto Car No-Spill Coolant Filling Plastic Kit Universal Radiator Funnel

Description

15pc Auto Car No-Spill Coolant Filling Plastic Kit Universal Radiator Funnel
Description:
Radiator Filler Coolant Refill Kit
If your vehicle has a closed coolant system, chances are that it easily overheats or belts squeak due to coolant overflow. To completely remove the air from the coolant system on vehicles with a fill cap on the radiator, the Radiator Filler Coolant Refill Kit will get the job done without spills or messes.
CHECK FOR BLOWN HEAD GASKETS
It also allows you to check for blown head gaskets once the system is completely purged of air. Operating the engine with a blown head gasket will produce air bubbles that can be tested with an emissions analyzer (not included) to see if they are exhaust gases.
Instruction:
1. First install the correct sized adapter into the correct cap. Place the gasket in a downward position. Tighten the cap with adaptor to make sure it doesn’t leak.
2. If 45° elbow or extension needed, place the funnel after elbow or extension is placed well into the adapter opening.
3. Fill funnel slowly and carefully with coolant about 1/3 full.
4. When run the engine with funnel attached, fluid level should be at low position. Keep RPM on idle position. (Shut down the engine if notice the fluid level rise excessively. Wait for fluid level go lower before restarting the engine.)
5. Use Fluid Stopper for remaining fluid inside the funnel to flow to the radiator hose by squeeze it and release.
6. After finish, remove the funnel ( and or extension/elbow) & adapter, close the radiator with cap tightly.
Package List:
1 Set * Engine Oil Funnel Filler Adaptor(15pcs)