High quality Titanic 3D Paper Model Fly 153 - Titanic RMS 3D Paper Model Kit ax

Description

New Titanic RMS 3D Paper Model Kit High quality Titanic 3D Paper Model Fly 153
Product Description
Titanic Model Fly 153 - Titanic 3D RMS paper model
Model drawing material: 200 grams or 230 grams of white cardboard
Specification material: ordinary A4 printing paper
Drawing format:PDF
Drawing quantity:41
Whether there is a specification: there are
Quality of original drawings
PDF drawings, clarity is very high
You will receive a set of colour-printed A4 cards not a finished model, Buyers need to cut, fold and stick them.
Cut out the details of the paper model and glue them together, as indicated in the instructions.
If you have any question in making, please feel free to contact me
Guide to build :Basic steps to make Paper Models.
1) Cut out each part roughly.
2) Use a pencil to mark note softly behind each part to avoid disorder (Don't use a pen as it probably makes damaged trace on the front side).
3) Use Scissor or Craft Knife to cut parts precisely by following the outer edge. The level of precision affects the effect of combination. (Cut the most outer edge if the line is thick).
Suggested TIPS :
A. For Scissor cutting, suggest not to push the Scissor but pull the paper.
B. To make the fold of parts better, please put the part firmly on the table, and put the ruler on that to fold the line. If you have to fold inside, you could first fold it softly outside to make the trace, and fold it back to inside then.
C. To make the curved parts better, place the part on the corner of table then push and pull it back and forth.
D. To make parts like cylinder, use tools such as pen to assist to make the curl more natural.