-40%

SR Foredom Motor Brush MP132P Carbon Brushes SR SRH Flex Shaft FOREDOM ORIGINAL

$ 6.67

Availability: 36 in stock
  • California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Featured Refinements: Foredom Flex Shaft
  • Restocking Fee: No
  • Brand: Foredom
  • Return shipping will be paid by: Seller
  • Condition: New with tags
  • Country/Region of Manufacture: United States
  • Item must be returned within: 30 Days
  • 1 Pair Foredom Motor Brush MP132P: ORIGINAL FOREDOM PART
  • All returns accepted: Returns Accepted
  • Type: Rotary Tool

    Description

    FOREDOM MOTOR BRUSH
    MP132P CARBON BRUSHES
    -
    -
    FOR SR & SRH FLEX SHAFT - 1 PAIR
    -
    A Pair of
    FOREDOM ORIGINAL
    motor brushes for all 1/6 Horsepower M.SR, M.SRM, M.SRB, M.SRH, M.SRMH and M.SRBH models, both 115 Volt for domestic use and 230 Volt for international use.
    Brushes should be checked for wear periodically. When new they are approximately 5/8" long. Replace them when they have worn to 1/4".
    *** Be sure to replace both motor brushes even if one of them is less worn than the other.
    NOTE: Earlier models of Series SR motors (built prior to November 2005) are 1/8HP and use different brushes, part number: MP2019P.
    JETS Product # 0616-0132
    Made In USA
    by Foredom
    ®
    PART# MP132P
    Shipping: Via USPS MAIL
    ®
    Please visit
    JETSTOOLS
    our ebay Store for many more Foredom Tools and Accessories along with many more Tools and Supplies for Jewelry Making, Woodworking and Wood Carving, Hobby and Craft and a selection of other
    J
    ewelers
    E
    quipment
    T
    ools
    S
    upplies.
    JETSINC.
    Learn More About Motor Brushes:
    All Foredom electric motors are the 2-pole type, and use one set of brushes, one on each side of the motor case, opposite the shaft end. The brushes are installed in brush holders, which are copper or brass tubes encased in plastic, with shallow plastic screw caps to retain, and provide access to, the brushes. The leads from the motor power cord are connected to the metal brush tubes, from which current flows into the brushes. A brush consists principally of a length of compressed graphite, with carefully controlled characteristics to provide the lowest possible resistance, low friction, and long life. A flexible copper pigtail is embedded in the brush, terminated in a U or disc terminal. The pigtail is surrounded by a coil spring. The free end of the brush is curved, to match the curvature of the commutator. When the brush is inserted in the brush holder and the screw cap is in place, the spring maintains proper brush pressure on the commutator as the brush wears, and the pigtail terminal contacts the inner metal tube to provide a current path to the brush.
    E2  517 CKSP M P